SCM Ultrafine Mill

SCM series ultrafine grinding is based on years’ experience of accumulated mill production, absorbing the Swedish advanced mechanical manufacturing technology is a new superfine powder and through the test and improvement for many years and development (325-2500) processing equipment. It is the crystallization of advanced technology, which is leading the world trend of the latest milling machine.

  • Feedstock Size:10-20mm
  • throughout:0.4-7.5T/h
  • Fields Of Application:SCM series of ultra-fine grinding is widely used in paint, paper, paint, rubber, plastic, packing, cosmetics, chemical products and other industries.
  • Suitable Materials: SCM series of ultra-fine grinding is mainly applied to the processing of Mohs hardness of < 9 nonflammable and explosive of brittle materials, such as: coal, mica, talc, graphite, quartz, fluorite, calcite, dolomite, limestone, kaolin, bentonite, barite, potassium feldspar, bauxite, coal gangue.
  •  

The advangtage of our products

Ultrafine Mill Advantages

low cost, high performance

In the finished product fineness and power under the condition of the same SCM ultrafine mill, compared with jet mill and stirring mill high yield 40%, while the energy consumption is only 1/3 of that of jet mill, high production efficiency and low energy consumption.

Good stability, high reliability

SCM super fine mill high fineness, according to need can be adjusted in 325 ~2500 mesh, product fineness disposable is D97 ≤ 5 μ M. The mill chamber no rolling bearing, without screws, so there is no bearings and seals the vulnerability problems, no screw loosening and damage to the equipment, safe and reliable.

Ideal product size

SCM series ultrafine grinding is equipped with the pulse dust collector and muffler, greatly reducing the dust pollution, truly clean, environmental protection.

The data of our products

Ultrafine Mill Working Principle

Host motor through a speed reducer drives the spindle and the turntable, turntable driven by the column pin dozens of ring roll in the ring rolling and rotating raceway. Bulk material by hammer crusher broken into small particles by the hoist into a storage bin, electromagnetic vibrating feeder will even materials to middle upper turntable, material under the centrifugal force scattered to the circumference, and fall into the mill race was ring roller stamping, rolling, polishing and grinding ring, the first layer of crushed material in the second layer and the three layer, suction high-pressure centrifugal fan external air suction machine, and after the meal third layers of crushed into powder selecting machine. The turbine rotating powder machine in the coarse particles fall heavy grinding, fine powder with airflow into the cyclone powder collector and the lower part of the discharge valve discharge is finished, the air flow with a small amount of fine dust through the pulse dust collector after purification by the blower and exhaust muffler.

Name & Model SCM8021 SCM9032 SCM10036 SCM12544
Ring roll number (pcs) 21 32 36 44
Working diameter (mm) Φ800 Φ900 Φ1000 Φ1300
Grinding rill and roller path number (pcs) 1X3 1×4 1×4 2×4
Revolving Speed (rmin) 230-240 200-220 180-200 135-155
Max feed size (mm) ≤10 ≤20 ≤20 ≤20
Final size (mesh) 325-2500 325-2500 325-2500 325-2500
Output (kgh) 400-4500 400-5500 400-7500 1200-12000
contour dimension (mm) 13000×3000×5800 14700×4800×8600 18000×4600×8600 14000×9000×10250
Whole machine capacity (kw) 144-165 185-204 263-290 380-430
Main motor Model YB2-250M-4 YB2-280M-8 YB2-315L1-6 YB2-315L2-6
Power (kw) 55 45×2 110 160
Rotate speed (rmin) 1440 750 990 990
Analytical engine (FM motor) Model Y180M-4 Y180L-4 Y100L1-4 YB2-225S-4
Power (kw) 18.5 22 30 37
Rotate speed (rmin) 1440 1440 1440 1440
Blower motor Model Y225M-2 Y250M-2 Y280M-2 YB2-250M-2
Power (kw) 45 55 75 55×2
Rotate speed (rmin) 2940 2940 2940 2940
Elevator Bucket model TH-200 TH-200 TH-300 TH-300
Motor model Y100L-4 YB2-100L2-4 YB2-112M-4 YB2-112M-4
Motor power (kw) 3 3 4 4
Rotate speed (rmin) 1440 1440 1440 1440
Hammer Crusher Hammer Crusher model PC300×400 PC400×600 PC400×600 PC600×800
Motor model YB2-160M-4 YB2-180M-4 YB2-180M-4 YB2-280S-6
Power (kw) 11 18.5 18.5 45
Rotate speed (rmin) 1440 1440 1440 990
Magnetic vibrating feeder Model GZ1F GZ1F    
Power (kw) 0.06 0.06    
Electrical machine Model     LS159×1050 LS159×2000
Power (kw)     2.2 3
Discharge valve Discharge valve model ZJD-200 ZJD-200 ZJD-200 ZJD-250
Motor model YB2-80M2-4 YB2-80M2-4 YB2-80M2-4 YB2-90S-4
Power (kw) 0.75×2 0.75×2 0.75×3 1.1
Rotate speed (rmin) 1440 1440 1440 1440
Pulse dust collectors Model DMC120-II model DMC144-II model DMC184-II model DMC160-II model*2
Air compressor Air compressor Model KSH100D-7.5KW KSH240D-15KW KSH240D-15KW KSH240D-15KW×2/td>
Motor model YB2-132M-4 YB2-160L-4 YB2-160L-4 YB2-160L-4
Power (kw) 7.5 15 15 15
Rotate speed (rmin) 1440 1440 1440 1440